Default CISCO Switch Password

0
378
Default CISCO Switch Password

Many users are using Cisco switches to connect multiple devices to the same network. In such a way as connecting computers, servers, and printers to one shared source, CISCO switches have the leading role. However, if you are a beginner and using it for the first time, you might face the issue of default CISCO passwords.

The initial login to the switch requires the username and password. There are various settings that you can only access once you log in with correct default password credentials.

The Cisco switch comes with default credentials that are readily available to other users as well.

Thus, it is of the utmost importance to change the default password and secure your entire network.

However, some users also face issues with recovering or setting a new default password.

Through this article, you will get all the details of the CISCO default password.

So, let’s find out step by step;

List of default CISCO Switch passwords

The CISCO switch includes default factory settings as well as credentials. To begin, use the default username and password “cisco” or “admin” to access your switch console. Only then will you be able to access the configuring and password settings.

However, it has some different versions of switching the username and password could be used.

Below is the list of CISCO Switch Models and default Passwords;

CISCO Switch model Username Username
DPC2320 none none
ESW-520-24-K9 cisco cisco
ESW-520-24P-K9 cisco cisco
RV016 admin admin
RV042 admin admin
RV042G admin admin
RV110W cisco cisco
SFE1000P admin (none)
SPA2102 admin (none)
SPA8800 admin (none)
SRP250-U admin admin
SRW200oMP admin admin

If you have a Cisco switch SFE1000P, then the default IP is given by DHCP. However, it could vary depending on the network it is installed on.

How to change the default CISCO password?

Cisco comes with a default username and password, which you can change to secure your network and system. Many users find it difficult to get access to password change options on the portal.

Yet, changing the default Cisco password is not a hectic task.

Follow the below-mentioned steps to change your default password;

  • First, you have to log in to the Switch console with the default username and password “cisco” or “admin”.
  • Furthermore, you will get to see various commands and options. Options could vary according to the model.
  • After that, you will see the option to configure the new password setting. You have to select the option as given, “Y” for yes and “N” for no. Press “y” on the keyword.
  • You will have to enter the old default password for the switch.
  • After that, you have to enter your new password. And then press Enter.

You will get the notification that the password has been changed successfully.

How to Recover the Default CISCO Switch password?

The Cisco switch also allows you to recover the password. If somehow you have forgotten the password and are unable to log in to the portal, then recovering the default CISCO password is the best option.

This service permits you physical access to the console port of the device. But there are some conditions for it;

  • You can get into the boot menu and access the password recovery in the boot menu directly if password recovery is enabled. You can find all the configuration and user files over there.
  • If the password recovery option is disabled, you can still access the boot menu and the password recovery menu. But you can’t get the user and configuration files.
  • If you have set your device to secure your private information with a secure phrase, in that case, you cannot access the password recovery menu at boot.

By default the password recovery is available. Below are steps that could help you to recover passwords;

  • First, you need to log in to the switch console with the default username and password “cisco” or “admin”. Alternatively, enter your new change credentials.
  • You will get to see the Privileged EXEC mode. Use the below command to enter the global configuration mode:

SG350X#configure terminal

  • Next step is optional, yet if you want to enable recovery setting, then enter the command;

SG350X#service password-recovery

  • After entering the recovery command, Press “Y” as yes on the keyboard.
  • Now you have enabled the password recovery option.
  • To exit, type the command

SG350X(config)#exit

  • If you wish to save the save configured settings, in the Privileged EXEC mode, enter the command;

SG350X#copy running-config startup-config

How to Configure Enable password settings?

The enabled password settings are automatically secured and saved to the config file. Your config file will only appear as “encrypted” and can only be opened with the encrypted password.

To configure the enable password setting follow the given commands carefully;

  • Use your default password and username to log in to the switch console.
  • To enter the Global configuration mode, enter the command;

SG350X#configure terminal

  • If you wish to configure the local password for a particular user to access, enter the command;

SG350X(config)#enable password [level privilege-level] [unencrypted-password | encrypted encrypted-password]

  • After this, you will get the various options like;
  1. Level privilege-level
  2. Read Only CLI access
  3. Read/limit write CLI access
  4. Read/write management Access
  • Further, you have entered the enable password as given below

SG350X(config)#enable password level 7 Cisco123$

*the password Cisco123$ is for level 7 user

Unencrypted password – This password should contain 0 to 159 characters.

  • Then, in the next step, you have to enter the encrypted password from another config file.

SG350X#(config) enable password level Cisco123$

For example – SG350X(config)#enable password encrypted 6f43205030a1e24387300737fab

Note – 6f43205030a1e24387300737fab, it is the example of encrypted password version of Cisco123$

  • After this, you have returned to user password by entering the command;

SG350X(config)#no enable password

  • To exit it type; SG350X(config)#exit

Now you have configured the enable password settings.

Set Password Complexity Setting

The CISCO switch has password complexity setting rules. It will add the feature that a new password must be set up under the following conditions:

  • Password’s length should be eight characters.
  • It must contain characters of uppercase, lower care, number, symbols.
  • Must be different from current password
  • No word or number should be repetitive more than three times

To turn on the password complexity settings, follow the below steps;

  • Login in with default credentials to the console switch.
  • Enter the global configuration mode by typing;

SG350X#configure terminal

  • Now you have to enable password complexity by entering;

SG350X(config)#passwords complexity enable

  • Now password complexity is enabled, and to save the configuration setting, enter the command; SG350X#copy running-config startup-config
  • In the next step Press “Y” as yes.

Now you have turned on the password complexity setting on your switch.

Conclusion

In a nutshell, setting the Cisco default password is quite an easy process. However, beginners may find it a bit hard. Yet, the above-given steps will assist you in changing your default Cisco password. Moreover, the above information can also help recover CISCO default passwords and enable configuration passwords as well.

For security measures, the Cisco switch comes with a default option of password complexity that will only allow setting a solid combination of numbers and letters for passwords. Thus, it will secure your system and data from online threats.

People are also reading: 

LEAVE A REPLY

Please enter your comment!
Please enter your name here